€563.60*
% €593.30* (5.01% saved vs. recommended price)will be ordered for you
Lead time: 7 days (according to manufacturer**),
est. total delivery time: 1-2 weeks
Product number:
1909101
EAN:
5060998710331
Manufacturer product ID:
EMU-1-BAS
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "Actisense-EMU-1-BAS-NMEA2000 motor interface"
NMEA2000 interfaces
NMEA2000 is based on CAN (Controller Area Netwerk) bus system. NMEA2000 certified products communicate with each other
on the NMEA2000 bus. Actisense Interfaces has developed it
NMEA0183 enable devices in a NMEA2000 bus to operate on. Also, the bi-directional data exchange between the
NMEA2000 network and PC.
NGW-1 - NMEA 2000 - 0183 Gateway
Use existing NMEA0183 devices on the NMEA2000 Network The NGW-1 NMEA the various sytems together. NMEA0183 and
NMEA2000 data is reciprocated in both directions and hergewandelt. Using the configuration software can specify which data should be made in both directions.
If necessary, several NMEA0183 devices can each be connected via a NGW-1 gateways with the NMEA 2000 bus system.
Through the ISO-Drive output and a galvanically isolated OPTO input ground loops are eliminated. The NGW-1 NMEA 2000 the insulation requirements of the regulations.
Characteristics:
-1 HS + OPTO input
-1 HS + ISO-Drive output
-Baud rate up to 115200
-Use of a NMEA0183 device in NMEA2000® NetzwerkEMU-1 - NMEA2000® motor interface
Monitoring an engine with analog donors on NMEA2000 multifunction displays
The EMU-1 has to allow a PC-based configuration tool that changes the settings in the EMU-1 to adapt to the donor of the engine. EMU-1 offers a flexible solution for engines of many makes and models. Capable of measuring a wide range of motor parameters, transmits the EMU-1, the engine data over the NMEA 2000 network.
By tailor-made housing, the electronics is securely sealed and allows quick access to the electrical connections.
To configure the EMU 1 a Actisense NGT-1 NMEA 2000 PC Interface USB required. The NGT-1 is used to update the firmware, connect the configuration tool and the display elements to a PC for diagnosis and information purposes, you can use the NMEA Reader.
Characteristics:
-6 measurement / parameter inputs
-4 Four alarm inputs
-2 tachometer inputs
-2 additional auxiliary inputs that are flexible to adapt installations
-A total operating hours tachometer (RPM) are logged by the monitoring input of the motor
-On vessels with several machines is a EMU-1 Interface to be used for each machine
Manual:
https://www.actisense.com/wp-content/uploads/2017/07/EMU-1-User-Manual-issue-1.06.pdf
NMEA2000 is based on CAN (Controller Area Netwerk) bus system. NMEA2000 certified products communicate with each other
on the NMEA2000 bus. Actisense Interfaces has developed it
NMEA0183 enable devices in a NMEA2000 bus to operate on. Also, the bi-directional data exchange between the
NMEA2000 network and PC.
NGW-1 - NMEA 2000 - 0183 Gateway
Use existing NMEA0183 devices on the NMEA2000 Network The NGW-1 NMEA the various sytems together. NMEA0183 and
NMEA2000 data is reciprocated in both directions and hergewandelt. Using the configuration software can specify which data should be made in both directions.
If necessary, several NMEA0183 devices can each be connected via a NGW-1 gateways with the NMEA 2000 bus system.
Through the ISO-Drive output and a galvanically isolated OPTO input ground loops are eliminated. The NGW-1 NMEA 2000 the insulation requirements of the regulations.
Characteristics:
-1 HS + OPTO input
-1 HS + ISO-Drive output
-Baud rate up to 115200
-Use of a NMEA0183 device in NMEA2000® NetzwerkEMU-1 - NMEA2000® motor interface
Monitoring an engine with analog donors on NMEA2000 multifunction displays
The EMU-1 has to allow a PC-based configuration tool that changes the settings in the EMU-1 to adapt to the donor of the engine. EMU-1 offers a flexible solution for engines of many makes and models. Capable of measuring a wide range of motor parameters, transmits the EMU-1, the engine data over the NMEA 2000 network.
By tailor-made housing, the electronics is securely sealed and allows quick access to the electrical connections.
To configure the EMU 1 a Actisense NGT-1 NMEA 2000 PC Interface USB required. The NGT-1 is used to update the firmware, connect the configuration tool and the display elements to a PC for diagnosis and information purposes, you can use the NMEA Reader.
Characteristics:
-6 measurement / parameter inputs
-4 Four alarm inputs
-2 tachometer inputs
-2 additional auxiliary inputs that are flexible to adapt installations
-A total operating hours tachometer (RPM) are logged by the monitoring input of the motor
-On vessels with several machines is a EMU-1 Interface to be used for each machine
Manual:
https://www.actisense.com/wp-content/uploads/2017/07/EMU-1-User-Manual-issue-1.06.pdf