WEATHERDOCK - AIS transponder easyTRX3-IS IGPS N2K

A20000
SOTDMA AIS transmitter / receiver Class B with integrated antenna splitter, internal GPS antenna and NMEA2000

Highlights
• AIS Class B SOTDMA method
• 5 Watt radiated power
• Higher transmission rate (speed dependent)
• Integrated antenna splitter
• Integrated GPS antenna
• NMEA2000 data output
• Handy, robust and waterproof housing
• configuration of the device with USB power supply possible
• Reading the internal data memory with USB power supply possible
• 1-channel transmitter
• 2-channel receiver to simultaneously and permanent monitoring of the two AIS frequencies
• Channel Sensitivity: better than -112dBm


The new easyTRX3 with SOTDMA presents the next generation of Weatherdock AIS Class B transceiver.
With a stronger transmission power of 5 watts and higher transmission rates in AIS protocols your navigation is improved while increasing your safety on board.
will see even better seen and!
The AIS Class B transceiver SOTDMA easyTRX3 includes a transmitter and AIS-2 AIS receiver to be able to receive and permanently parallel the transmitted signals on the two AIS AIS frequencies. A 72-channel GNSS / GPS receiver provides the best reception of the position information.
enlarge 5 watts transmit power, the transmission range of your AIS position reports and therefore also your visibility in your environment.
By the used SOTDMA time slot transmission method of easyTRX3 able higher data rates can be achieved position messages of your own AIS. This is achieved by the easyTRX3 already makes in the transmission of AIS data a reservation for the same time slot in the next transmission.
The easyTRX3 comes standard with USB, NMEA 2000, NMEA 0183 and an internal FM antenna splitter. For owners of fiberglass and wood hull boats, the integrated GPS receiver module is particularly interesting because it eliminates the installation of an external GPS antenna for these types of boats.
In the internal memory, all AIS can be stored for backup driving data, similar to a black box. With a USB connection to a PC / MAC, the memory can be read or the relevant ship data is programmed using the software supplied in the easyTRX3 without the easyTRX3 must be connected to its own power supply.
The modular design of the easyTRX3 and future demands. The device can such future depending on the customer with additional modules. be as WiFi, DVB-T2 or mobile equipped and expanded.


Technical specifications:
As a general rule
• 1-channel FM transmitter
• 2-channel FM receiver
• 72-channel GNSS receiver
• Channel Sensitivity: better than -112 dBm
• IP67
• Operating temperature -10 ° C to + 55 ° C
• Data type NMEA output: VDM
• Transmission power: 5 watts
• Dimensions: 190 mm * 135 mm * 60 mm
• Weight: 700 grams
frequencies
• AIS: 161.975 MHz and 162.025 MHz
approvals
• BSH
• IEC62287-2