€726.40*
% €854.42* (14.98% saved vs. recommended price)will be ordered for you
Lead time: 7 days (according to manufacturer**),
est. total delivery time: 1-2 weeks
Product number:
1972903
EAN:
8719076023128
Manufacturer product ID:
ORI303050000
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "VICTRON - 50A buck-boost DC / DC converter"
DC-DC converter for charging a 12V or 24V battery for vehicles equipped with an intelligent alternator
(Regenerative braking, Euro 5 and 6 engines)
The DC-DC converter buck-boost is a DC-DC converter for charging a 12V or 24V battery for vehicles equipped with an intelligent alternator.
The converter charges the auxiliary battery with a preset charge voltage, in which high voltages (e.g., Mercedes. 15.4V) and low voltage are eliminated.
System for detecting if "motor running"
A deep discharge of the starter battery of the vehicle is prevented by a built-in system that detects when the "engine running".
However, the converter can also be activated by a programmable input (D +, CANbus or (+) terminal 15) instead of this detection system.
fully programmable
The converter can be fully programmed application PC using a simple and user-friendly.
(There is a USB Type A male connector to USB type B connector is required)
A product for 12V, 24V and 12 / 24V systems
The converter can be programmed so that it loads a 12V or a 24V auxiliary battery either a 12V or a 24V alternator or a starter battery.
Charge current and input current limit
The output current is determined by the following factors:
- The setting of the maximum charging current.
- The setting of the maximum input current.
- Limiting the maximum operating temperature of the converter.
Input status indicators (LED)
Green: Converter is to
Yellow: input voltage below the threshold value, converter from
Red: Over temperature converter from
Blue, flashing quickly: engine is running, converter turns on the set delay
Blue, blinking slowly: input undervoltage, converter from
Status indicators output (LED)
Green: Converter from battery voltage normal
Yellow: Converter from Battery Low
Red: converter from the battery is discharged or not connected
Purple: converter to
Input voltage range 7-35V
Threshold undervoltage 10V
Output voltage range 2-30V
Maximum charge current 12V: 50A 24V: 25A
Converter power consumption of LEDs from (power saving mode) 7 mA
On / Off input "on" threshold voltage> 2 V, Maximum Input Voltage 60 V
Operating temperature range -25 to + 80 ° C
. Ambient temperature Max power: up to 40 ° C
weight 1.1kg
Dimensions 213 x 120 x 30mm
(Regenerative braking, Euro 5 and 6 engines)
The DC-DC converter buck-boost is a DC-DC converter for charging a 12V or 24V battery for vehicles equipped with an intelligent alternator.
The converter charges the auxiliary battery with a preset charge voltage, in which high voltages (e.g., Mercedes. 15.4V) and low voltage are eliminated.
System for detecting if "motor running"
A deep discharge of the starter battery of the vehicle is prevented by a built-in system that detects when the "engine running".
However, the converter can also be activated by a programmable input (D +, CANbus or (+) terminal 15) instead of this detection system.
fully programmable
The converter can be fully programmed application PC using a simple and user-friendly.
(There is a USB Type A male connector to USB type B connector is required)
A product for 12V, 24V and 12 / 24V systems
The converter can be programmed so that it loads a 12V or a 24V auxiliary battery either a 12V or a 24V alternator or a starter battery.
Charge current and input current limit
The output current is determined by the following factors:
- The setting of the maximum charging current.
- The setting of the maximum input current.
- Limiting the maximum operating temperature of the converter.
Input status indicators (LED)
Green: Converter is to
Yellow: input voltage below the threshold value, converter from
Red: Over temperature converter from
Blue, flashing quickly: engine is running, converter turns on the set delay
Blue, blinking slowly: input undervoltage, converter from
Status indicators output (LED)
Green: Converter from battery voltage normal
Yellow: Converter from Battery Low
Red: converter from the battery is discharged or not connected
Purple: converter to
Input voltage range 7-35V
Threshold undervoltage 10V
Output voltage range 2-30V
Maximum charge current 12V: 50A 24V: 25A
Converter power consumption of LEDs from (power saving mode) 7 mA
On / Off input "on" threshold voltage> 2 V, Maximum Input Voltage 60 V
Operating temperature range -25 to + 80 ° C
. Ambient temperature Max power: up to 40 ° C
weight 1.1kg
Dimensions 213 x 120 x 30mm