€175.90*
% €189.00* (6.93% saved vs. recommended price)1 in stock
Available, delivery time: 1-3 business days
Product number:
1973889
Manufacturer product ID:
CLIP BM1 Li
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "NASA - Battery Monitor BM-1L / 12 V"
Especially for Lithium Batery!
The BM-1L was developed for monitoring 12 V lithium iron phosphate battery banks. The device is supplied with a 100 A precision resistor (shunt) and a prefabricated wiring harness, which enables easy installation. The battery monitor continuously monitors the on-board voltage, the charging and discharging current and the state of charge of the battery and the remaining percentage for the charge or discharge time. An optical undervoltage alarm warns against deep discharge are consumed and fed invited amp hours indicated Batterie.Zusätzlich. This value can via the menu, for example, be a fully charged battery, are reset. In addition, the voltage of a second battery bank (e.g., starter battery) can be displayed.
The BM1 L is specially adapted to the different charging and discharging of LiFePo4 Batteruien. By connecting a battery monitor a more efficient use of the battery is possible, the battery life is prolonged and the risk of failure is reduced.
specifications:
Supply voltage: 8-16 V DC
Battery capacity: 5-600 Ah
Discharge current: max. 100 A
Charging current: max. 100 A
RTD: 100 A / 50 mV
Display capacity: 1.0 Ah in steps
Display of the streams 0 - 9.9 A, 0.1 A in steps, 10 - 100 A in 1.0 A steps
High contrast LCD, backlit for night operation
Display 110 x 110 mm standard Clipper housing
Low own power consumption: 1.5 mA (without illumination)
In the delivery connection cable contained: connection cable 100 A shunt for battery M8 Ringkabelschuh.5 meters connection cable from the display device to the shunt, with ring cable lugs for connection provided on the shunt, supply line with fuse and M8 ring terminal for connection to the battery.
The BM-1L was developed for monitoring 12 V lithium iron phosphate battery banks. The device is supplied with a 100 A precision resistor (shunt) and a prefabricated wiring harness, which enables easy installation. The battery monitor continuously monitors the on-board voltage, the charging and discharging current and the state of charge of the battery and the remaining percentage for the charge or discharge time. An optical undervoltage alarm warns against deep discharge are consumed and fed invited amp hours indicated Batterie.Zusätzlich. This value can via the menu, for example, be a fully charged battery, are reset. In addition, the voltage of a second battery bank (e.g., starter battery) can be displayed.
The BM1 L is specially adapted to the different charging and discharging of LiFePo4 Batteruien. By connecting a battery monitor a more efficient use of the battery is possible, the battery life is prolonged and the risk of failure is reduced.
specifications:
Supply voltage: 8-16 V DC
Battery capacity: 5-600 Ah
Discharge current: max. 100 A
Charging current: max. 100 A
RTD: 100 A / 50 mV
Display capacity: 1.0 Ah in steps
Display of the streams 0 - 9.9 A, 0.1 A in steps, 10 - 100 A in 1.0 A steps
High contrast LCD, backlit for night operation
Display 110 x 110 mm standard Clipper housing
Low own power consumption: 1.5 mA (without illumination)
In the delivery connection cable contained: connection cable 100 A shunt for battery M8 Ringkabelschuh.5 meters connection cable from the display device to the shunt, with ring cable lugs for connection provided on the shunt, supply line with fuse and M8 ring terminal for connection to the battery.