€263.90*
% €310.59* (15.03% saved vs. recommended price)2 in stock
Available, delivery time: 1-3 business days
Product number:
1973898
EAN:
8719076047698
Manufacturer product ID:
ORI121236120
Please note that our English product descriptions are automatic translations from German. If anything is unclear, please contact us and/or double check the description by the manufacturer. Thanks for your understanding! - your Klabauter Crew
Product information "Victron-Orion-Tr Smart 12/12-30A DC/DC charger"
Orion-TR Smart isolated DC/DC chargers with a 3-stable batteryada algorithm
Suitable for Bluetooth Smart
Monitoring, changing the settings and updating the charger at new
Standing software functions can be used with any Bluetooth-enabled smartphone, tablet or others
Device can be carried out.
Fully programmable
- Batterieladealgorithm (configurable) or firm output.
- Intelligent generator compatibility: engine running.
Adaptive 3-stage loading algorithm: constant current-constant voltage-preservation
• With lead batteries, it is important that the recording time is kept short in flat discharges to
Avoid an overload of the battery. After a deep discharge, the
Constant voltage duration automatically extended to ensure that the battery is completely
load.
• The recording time is fixed for lithium batteries, 2 hours by default.
• Alternatively, a fixed output voltage can be selected.
Fern-/shutdown
A remote-controlled on/off switch or a relay contact can be found on the two-pin connector
connect.
Alternatively, the connection H (right) of the two-pole plug into a battery plus pole or the
Connection l (left) of the two-pin connector to the battery minus pole (or for example to the body
of a vehicle).
All models are short -circuit -resistant and can be switched in parallel to increase the output current
will.
Unlimited many devices can be switched in parallel.
Over -temperature protection
With high ambient temperatures, the output current is reduced.
Protection class IP43
When the screw terminals are installed on the device.
Screw terminals
No special tools are required for installation.
Input protection (not interchangeable)
Technical specifications:
Model: 12/12-30 (360W)
Input voltage area (1): 10-17 V
Sub -voltage shutdown: 7 V
Sub -voltage restart: 7.5 V
Starting stern tension: 12.2V
Setting range output voltage: 10-15 V
Tolerance Output voltage: +/- 0.2 V
Starting noise: 2 MV RMS
Account.
Maximum output current (10 s) with output stern voltage minus 20%: 40 a
Short -circuit output current: 60 a
Account. Output power at 25 ° C: 430 W
Account. Output power at 40 ° C: 360 W
Efficiency: 87%
Electricity recording without load: <80 MA
Galvanic separation: 200 V DC between the entrance, exit and housing
Operating temperature range: -20 to +55 ° C (reduction in performance by 3% per ° C above 40 ° C)
Air humidity: max. 95%, not condensing
DC connection: screw terminals
Maximum cable cross -section: 16 mm² (AWG6)
Weight: 1.8 kg
Dimensions (HXBXT): 130 x 186 x 80 mm
(1): If the output voltage is set to nominal or lower than nominal, it remains stable within the specified input voltage area (downward-up function).
If the output voltage is set up by a certain percentage higher than the nominal value, the minimum input voltage, in which the output voltage remains stable (not drops), increases by the same percentage.
Suitable for Bluetooth Smart
Monitoring, changing the settings and updating the charger at new
Standing software functions can be used with any Bluetooth-enabled smartphone, tablet or others
Device can be carried out.
Fully programmable
- Batterieladealgorithm (configurable) or firm output.
- Intelligent generator compatibility: engine running.
Adaptive 3-stage loading algorithm: constant current-constant voltage-preservation
• With lead batteries, it is important that the recording time is kept short in flat discharges to
Avoid an overload of the battery. After a deep discharge, the
Constant voltage duration automatically extended to ensure that the battery is completely
load.
• The recording time is fixed for lithium batteries, 2 hours by default.
• Alternatively, a fixed output voltage can be selected.
Fern-/shutdown
A remote-controlled on/off switch or a relay contact can be found on the two-pin connector
connect.
Alternatively, the connection H (right) of the two-pole plug into a battery plus pole or the
Connection l (left) of the two-pin connector to the battery minus pole (or for example to the body
of a vehicle).
All models are short -circuit -resistant and can be switched in parallel to increase the output current
will.
Unlimited many devices can be switched in parallel.
Over -temperature protection
With high ambient temperatures, the output current is reduced.
Protection class IP43
When the screw terminals are installed on the device.
Screw terminals
No special tools are required for installation.
Input protection (not interchangeable)
Technical specifications:
Model: 12/12-30 (360W)
Input voltage area (1): 10-17 V
Sub -voltage shutdown: 7 V
Sub -voltage restart: 7.5 V
Starting stern tension: 12.2V
Setting range output voltage: 10-15 V
Tolerance Output voltage: +/- 0.2 V
Starting noise: 2 MV RMS
Account.
Maximum output current (10 s) with output stern voltage minus 20%: 40 a
Short -circuit output current: 60 a
Account. Output power at 25 ° C: 430 W
Account. Output power at 40 ° C: 360 W
Efficiency: 87%
Electricity recording without load: <80 MA
Galvanic separation: 200 V DC between the entrance, exit and housing
Operating temperature range: -20 to +55 ° C (reduction in performance by 3% per ° C above 40 ° C)
Air humidity: max. 95%, not condensing
DC connection: screw terminals
Maximum cable cross -section: 16 mm² (AWG6)
Weight: 1.8 kg
Dimensions (HXBXT): 130 x 186 x 80 mm
(1): If the output voltage is set to nominal or lower than nominal, it remains stable within the specified input voltage area (downward-up function).
If the output voltage is set up by a certain percentage higher than the nominal value, the minimum input voltage, in which the output voltage remains stable (not drops), increases by the same percentage.