VICTRON - Smart Hunt 1000A / 50mV

The intelligent battery shunt
The Smart Hunt is an all-in-one battery monitor, only without the display. Your phone acts as a display. The Smart Hunt connects via Bluetooth with the VictronConnect app on your phone (or tablet) and you can read all monitored battery parameters such as charge status, remaining time, course information and much more comfortable.

Alternatively, the Smart Hunt can be connected and be read by a GX device. Connection to the Smart Hunt via a VE.Direct cable.

The Smart Hunt is a good alternative for a BMV battery monitor, especially for systems where a battery monitoring is required, but less wiring and disorder is desired.
The Smart Hunt is equipped with Bluetooth, a VE.Direct port and a compound that can be used for: monitoring a second battery monitoring center or a temperature sensor.

Power supply voltage range from 6.5 to 70 VDC
Current consumption <1mA
Range of input voltage,
Additional battery 6.5 to 70 VDC
Battery capacity (Ah) 1-9999 Ah
Operating temperature -40 + 50 ° C (-40 - 120 ° F)
Measuring voltage of a second battery,
Temperature or center Yes
Temperature range -20 + 50 ° C
VE.Direct communication port Yes
RESOLUTION AND ACCURACY
Current ± 0.1A
Voltage ± 0.01V
Ampere hours ± 0.1 Ah
Charge state (0 - 100%) ± 0.1%
Remaining time ± 1 min
Temperature (if optional
Temperature sensor is attached)
± 1 ° C / ° F
(0 - 50 ° C or 30-120 ° F)
Current measurement accuracy ± 0.4%
Offset Less than 20/40/80 mA
Voltage measurement accuracy ± 0.3%
INSTALLATION & DIMENSIONS
Dimensions (HxBxT) 68 x 120 x 54 mm
Protection class IP21
STANDARDS
Safety EN 60335-1
Emissions / Immunity EN 61000-6-1 IEC EN 61000-6-2 IEC
EN-IEC 61000-6-3
Automotive industry EN 50498
Cable (supplied) Two cables with fuse for '+' - Connection
and starter battery or midpoint connecting
Optionally, temperature sensor (ASS000100000)