VICTRON - Orion Tr Smart 12 / 12-18A DC / DC charger

FIGURE SIMILAR !!!
These are the 18 Amperer execution!

***

New Release of the manufacturer.
First delivery in April in small numbers.

---> Current orders can be delivered until around the beginning of May! <---

***

Orion Tr Smart isolated DC / DC chargers with 3-stage battery charging algorithm

Suitable for Bluetooth Smart
Monitoring, change settings and update the charger for newly available
related software functions can work with any Bluetooth-enabled smartphone, tablet or other
Device are made.

fully programmable
- battery charging algorithm (configurable) or fixed output.
- Intelligent Generator Compatibility: motor running detection.

Adaptive 3-stage charging algorithm: constant current - constant voltage - Conservation
• For lead-acid batteries, it is important that in shallow discharges the recording time is kept short to
to avoid overloading the battery. After a deep discharge is the
Constant-voltage duration is automatically extended to ensure that the battery fully
charging.
• For lithium batteries, the recording time is fixed, by default 2 hours.
• Alternatively, a fixed output voltage can be selected.

Remote on / off feature
can be to the two-pin connector, a remote-controlled on / off switch or relay contact
connect.
Alternatively, the terminal H can (right) of the two-pin plug to a battery terminal or the
Terminal L (left) of the two-pin connector to the battery negative terminal (or, for example, to the body
a vehicle) are switched.

All models are short circuit and can be switched in parallel to increase the output current
become.
There can be an unlimited number of devices connected in parallel.

Overtemperature protection
At high ambient temperatures, the output current is reduced.

Protection class IP43
If the screw terminals are installed facing downward on the device.

screw
To install No special tools are required.
Input fuse (not replaceable)


Technical specifications:

Model: 12 / 12-18 (220W)
8-17 V: input voltage (1)
Undervoltage shutdown: 7 V
Undervoltage restart: 7.5V
Rated output voltage: 12,2V
Setting Output voltage: 10-15 V
Output voltage tolerance: +/- 0.2 V
Output Noise: 2 mV rms
Cont. Output current at the rated output voltage and 40 ° C: A 18
Maximum output current (10 s) at rated output voltage minus 20%: 25 A
Short circuit output current: 40 A
Cont. Output power at 25 ° C: 280 W
Cont. Output at 40 ° C: 220 W
Efficiency: 87%
Current consumption without load: <80 mA
Isolation: 200 V DC between input, output and housing
Operating temperature range: -20 to + 55 ° C (reduction of the power by 3% per ° C above 40 ° C)
Humidity: Max 95%, non-condensing.
DC connection: Screw
Maximum cable cross-section: 16 mm (AWG6)
Weight: 1.3 kg
Dimensions (HxBxT): 130 x 186 x 70 mm

(1): When the output voltage is set to a nominal or less than nominal, it remains (buck-boost function) within the specified input voltage range stably.
If the output voltage is set higher by a certain percentage than the nominal value, the minimum input voltage at which the output voltage remains stable increases (does not decrease), by the same percentage.